 |
Our Valuable |
|
|
| |
| |
| |
|
|
Sumip luminaries are available in totally enclosed GRP housing suitable for use in non hazardous, dusty, humid & corrosive atmosphere prevailing in Chemical, Fertilizer, Cement, Rayon Plants, and also Industries/Power Plants located in coastal areas.
- Construction
The luminaire housing is Hot Press Molded Glass Reinforced Plastic (GRP).
|
|
- Glass
Wellglass - Heat resistance glass is provided with synthetic rubber gasket.
Highbay/ Mediumbay - Teflon glass with rubber gasket provided.
- Retaining frame/ Wire guard
Strong stainless steel wire guard is provided to hold & protect the well glass.
-
Holder
Ceramic ES or BC lamp holders are provided as per customer requirement of high grade quality.
- Ballast & Igniter & Capacitor
For Integral type luminaries Heavy Duty Copper Wound Ballast, Capacitor & Igniter where ever applicable, are fitted right above the lamp holder assembly.
-
Entries
One no 3/4" BS conduit entry is provided for incoming cable with Brass/ Polyamide cable Gland with check nut.
-
Hardware
All hardware provided are SS 316.
-
Suspension
FRP Coated Eye Bolt is provided on top with good quality grommet to absorb the vibration. Alternatively SS 316 Clamps can also be provided. |
| |
| Current product range of manufacture of luminaries |
| Wellglass |
Integral SFWI000SERIES |
| Non Integral SFW1000SERIES |
| Highbay |
Integral SFHBI2100SERIES |
| Non Integral SFHB2100SERIES |
| Mediumbay |
Integral SFMBI2100SERIES |
| Non Integral SFMB2100SERIES |
| Street Light |
Integrated SFSI1000 SERIES |
|
|
| |
|
| Street Light Luminaire |
- Street Light aluminum Luminaries has cast aluminum base with hinged fiberglass casing provided with
polycarbonate glass & high grade inbuilt reflector.
- The enclosure opening is such that it makes pole fastening system, wiring plate & lamp compartment easily
accessible.
- To minimize installation & maintenance time the enclosure can be opened by just turning one knob without need
of any tools.
- For maintenance the wiring plate is completely removable simply by disconnecting two electric connectors &
loosening 3 screws.
|
| |
|
